Flat Roof Repair Calgary – Flat Roof Specialist

Expert Flat Roof Repair Services in Calgary

Contact Us

Take Advantage of 35 Years of Experience! Click Or Call To Speak With One Of Our Roofing Consultants.

Platinum Roofing has specialized in commercial and residential flat roofing in Calgary and southern Alberta for over 35 years…

With our experience and knowledge, we can help you choose the correct roofing membrane type for your flat roof or low sloped roof. Calgary’s Flat Roof Specialists install and repair all flat roof systems, TPO-SBS-EPDM-PVC, Tar & Gravel.

Platinum Roofing Calgary firmly stands behind our workmanship with a 10-year-to-Lifetime written warranty. Our experienced consultants can help you assess your roof needs and come up with a cost-effective action plan to repair your old flat roof or replace it with a new one .

Whether you’re a building owner, general contractor or a homeowner and you want affordable flat roofing and great service, call Calgary’s Flat Roof Specialists Today!

Quick Form

Commercial Roofing Contractor Calgary

SBS Roofing Membrane

Some of the more common application methods are:

Mechanically Fastened Base Sheet

Mechanically Fastened Base Sheet

The 1st ply “base sheet” fastened to the substrate using specialized screws and plates. The mechanically fastened option is the most cost effective application method for SBS systems.
Cap Sheet

Cap Sheet

The 2nd ply “Cap Sheet” membrane is embedded with mineral granular too reflect UV rays. Cap Sheet is typically heat welded to the 1st ply “Base Sheet” membrane by propane torch.

Fully Adhered Base sheet

The 1st ply “base sheet” is adhered to substrate using adhesives or hot asphalt. The 2nd ply “Cap Sheet” membrane is typically heat welded to the bottom ply “Base” membrane by propane torch.

EPDM Roofing Membrane

Ethyline Propolyne Diene Terpolymer (EPDM) is a durable synthetic rubber roofing membrane that is industry preferred in commercial roofing. It can survive harsh Canadian weather and is used mostly in low slope buildings. Seams are sealed with specifically formulated uncured tape so its installer friendly. EPDM is available in four different membranes AFR (fire retardant), FRM (protected with tough polyester fabric), Flexwhite (white film over EPDM) and EPDM (with polyester scrim embedded in the sheet). At Platinum Roofing we offer up to 30 years warranty in EPDM roofing. Probably the most cost effective of all the membranes.

Installation Methods

Fully Adhered

Fully adhered

Application glued to underside of membrane adhering to existing sub straight. This application is less cost effect than mechanically fastened. Fully adhered system have superior wind up lift properties and is resist hail damage.
Ballasted

Ballasted

Loose lay EPDM membrane ballasted with gravel, pavers is the most cost effective in the commercial roofing market place. This application is typically used for large warehouses and commercial retail units.
Mechanically Attached

Mechanically attached

The roof top ridged insulation board is mechanically attached to roof deck.The roof membrane is attached through insulation to the sub straight with mechanical fastener.

TPO Roofing Membrane

Thermoplastic Polyolefin (TPO) is a flame retardant and ultraviolet resistance membrane which is cost effective. Have exceptional seam strength as seams are sealed welded with hot air by a specialized hot air welder. This type of membrane is easily installed over existing BUR or metal roof system.
TPO Roofing Membrane

Installation Methods

Fully Adhered

Fully adhered

Application glued to underside of membrane adhering to existing sub straight.This application is less cost effect than mechanically fastened. Fully adhered system have superior wind up lift properties and is resist hail damage.
Mechanically Attached

Mechanically attached

The roof membrane is attached to the sub straight with mechanical fastener.The mechanically attached option is the most cost-effective.